China Small Acid Pump Manufacturers, Suppliers, Factory

Find a huge selection of Industrial Flocculant Dosing System from China at Dongkai. The automatic Industrial Flocculant Dosing System (also called Polymer doser, polymer makeup system, polymer preparation unit, etc.) adopts the PLC control method, which pioneered the integration of fully automatic adjustment of pharmaceutical concentration, automatic dosing, dissolution, and dosing, achieving a breakthrough in continuous unmanned operation; significantly reducing the cost of design, construction, operation and maintenance.

Metering system Ammonia dosing devicefor the low-odour and safe handling of ammonia solution. For a stable pH value and reduced corrosion in the vapour system.

Find a huge selection of Automated PAM Dosing Systems from China at Dongkai. Automated PAM Dosing Systems is a continuous polymer makeup and dosing equipment. The equipment can mix the polymer fully with high efficiency, and then the homogeneous activated polymer can be ready for further treatment. Widely applied as the supporting equipment of sludge dewatering equipment in municipal wastewater, slaughtering, chemical plant and etc.

Dongkai Pump's Water Quality Improvement System undergoes strict testing and quality control to ensure your water quality is hygienic and safe. It also has multiple layers of security to ensure the quality of the water is not contaminated. At the same time ,Rich experience QA can help you audit the factory or check the goods quality before shipping.

Low Price Automatic Tracer Dosing System Manufacturers and Suppliers in China. In order to control the corrosion and scaling of circulating water, it is usually achieved by adding a certain concentration of corrosion and scale inhibitors. In order to obtain good water treatment effect, besides selecting excellent formula, the key is to control the concentration (effective content) of water stabilizer within the specified range. At present, most domestic circulating water systems generally use manual dosing at regular intervals, and the effective value of the concentration of the chemicals in the water is obtained through analysis, and the opening of the metering pump is adjusted based on this. Or by measuring the amount of sewage discharge and water replenishment at the site, dosing the chemicals according to a certain proportion. Because of the large volume of the system, the lag of analysis data, the limited analysis frequency and the leakage of the system, it is still difficult to control the concentration of water stabilizer stably within the industrial index range. In view of the above problems and user requirements, our company designed a scheme of adding water treatment agent by using fluorescence tracer technology, which uses advanced tracer technology for automatic dosing. When you use this Automatic tracer dosing system, as long as the tracer produced by us is added to the water stabilizing agent used in your factory, your agent will become a tracer water treatment agent. During operation, it is only necessary to introduce the backwater of circulating water into the sampling water inlet of the controller. At this time, the effective components of the medicine in the water are monitored by the fluorescent tracer at any time, displayed on the display screen of the instrument and effectively controlled.

Dongkai is Chlorine Injection Pumps manufacturers and suppliers in China who can wholesale Chlorine Injection Pumps. A solenoid moves the solenoid shaft forwards and backwards by switching on and off. This stroke movement is transferred to the diaphragm in the dosing head. Two check valves prevent the feed chemical from flowing back during pumping. But that's not all. The stroke length and stroke rate can be precisely adjusted to alter the metering rate of Chlorine Injection Pumps.